SubChapter C. MECHANICAL POWER TRANSMISSION APPARATUS  


Section 29.111. Definitions
Section 29.112. Scope
Section 29.113. Applicability
Section 29.114. Penalty
Section 29.121. Gears and silent chain drives
Section 29.122. Pulleys, sheaves and sprockets
Section 29.123. Belts, ropes and chains
Section 29.124. Cone pulley belts
Section 29.125. Belt shifters and stopping devices
Section 29.126. Shafting
Section 29.127. Location
Section 29.128. Friction drives
Section 29.129. Shaft projections and keyways
Section 29.130. Collars, couplings and clutches
Section 29.131. Prime movers
Section 29.132. Machine control
Section 29.133. Operating rules
Section 29.134. Construction of guards
Section 29.135. Materials and construction of guards
Section 29.141. Purpose
Section 29.142. Belt tighteners and shifters
Section 29.143. Care of belts
Section 29.144. Belts on overhead pulleys
Section 29.145. Pulleys
Section 29.146. Couplings and clutches
Section 29.147. Shafting, bearings and hangers
Section 29.148. Oiling and cleaning
Section 29.149. Power control
Section 29.150. Hand-operated gears

Notation

Authority

   The provisions of this Subchapter C issued under the act of June 2, 1913 (P. L. 396, No. 267) (71 P. S. § §  1441—1451); and section 15 of the act of May 18, 1937 (P. L. 654, No. 174) (43 P. S. §  25-15), unless otherwise noted.

Source

   The provisions of this Subchapter C adopted February 16, 1929; amended through August 1, 1968, unless otherwise noted.

Cross References

   This subchapter cited in 34 Pa. Code §  5.118 (relating to transportation, machinery, and platforms); 34 Pa. Code §  29.11 (relating to all installations); 34 Pa. Code §  29.181 (relating to all installations); and 34 Pa. Code §  45.11 (relating to mechanical power transmission and machine layout).