Authority
The provisions of this Chapter 295 issued under the Solid Waste Management Act (35 P. S. § § 6018.101—6018.1003); the Pennsylvania Used Oil Recycling Act (58 P. S. § § 471—480); The Clean Streams Law (35 P. S. § § 691.1—691.1001); sections 1905-A, 1917-A and 1920-A of The Administrative Code of 1929 (71 P. S. § § 510-5, 510-17 and 510-20); and the Municipal Waste Planning, Recycling and Waste Reduction Act (53 P. S. § § 4000.101—4000.1904); amended under sections 5(b) and 402 of The Clean Streams Law (35 P. S. § § 691.5(b) and 691.402); section 302 of the Municipal Waste Planning, Recycling and Waste Reduction Act (53 P. S. § 4000.302); section 408(e) of the Pennsylvania Used Oil Recycling Act (58 P. S. 408(e)); sections 1905-A, 1917-A and 1920-A of The Administrative Code of 1929 (71 P. S. § § 510-5, 510-17 and 510-20); sections 104(a), 301(c) and 303(a) of the Land Recycling and Environmental Remediation Standards Act (35 P. S. § § 6026.104(a), 6026.301(c), 6026.303(a)); section 105(4) of the Waste Tire Recycling Act (35 P. S. § 6029.105(4)); sections 301 and 302 of the Radiation Protection Act (35 P. S. § § 7110.301 and 7110.302); and the Vehicle Code, 75 Pa.C.S. § 4909(e), unless otherwise noted.
Source
The provisions of this Chapter 295 adopted July 2, 1992, effective July 4, 1992, 22 Pa.B. 3389, unless otherwise noted.
Cross References
This chapter cited in 25 Pa. Code § 252.3 (relating to scope); 25 Pa. Code § 261a.2 (relating to definition of ‘‘solid waste’’); 25 Pa. Code § 287.101 (relating to general requirements for permit); 25 Pa. Code § 287.102 (relating to permit-by-rule); 25 Pa. Code § 287.121 (relating to application contents); 25 Pa. Code § 287.504 (relating to operating requirements); and 25 Pa. Code § 287.601 (relating to scope).
