 |
Pennsylvania Code (Last Updated: April 5, 2016) |
 |
Title 67. TRANSPORTATION |
|
PART I. Department of Transportation |
|
Subpart A. Vehicle Code Provisions |
|
Article VII. Vehicle Characteristics |
|
Chapter 171. School Buses and School Vehicles |
|
SubChapter B. SCHOOL BUS CHASSIS STANDARDS |
Section 171.26. Heating system
-
The chassis engine shall be equipped with plugged openings to supply hot water for the school bus heating system. The openings shall be suitable for attaching 3/4 inch pipe thread/hose connectors. The engine shall be capable of supplying water having a temperature of at least 170° F at a flow rate of 50 pounds/per minute at the return end of 30 feet of 1 inch inside diameter automotive hot water heater hose. See SBMI Standard No. 001 in Appendix A.
The provisions of this § 171.26 adopted August 19, 1983, effective August 20, 1983, 13 Pa.B. 2561; readopted December 4, 1987, effective December 5, 1987, 17 Pa.B. 5052; amended September 13, 1996, effective September 14, 1996, 26 Pa.B. 4411. Immediately preceding text appears at serial page (122784).
Notation
The provisions of this § 171.26 amended under the Vehicle Code, 75 Pa.C.S. § § 4103, 4551—4553 and 6103.