Section 1017.21. Taxicab meters

(a) Generally. Each taxicab must be equipped with one sealed meter that satisfies the requirements in this subchapter.

(b) Inspection and seals.

(1) A taxicab meter must be inspected by the Authority prior to use.

(2) The Authority will conduct meter accuracy testing to assure the meter is calibrated as provided in § 1017.22 (relating to meter calibration and testing).

(3) Upon determining that a meter functions properly, the Enforcement Department will attach a numbered seal to the meter.

(4) A meter may not be used in a taxicab unless it is sealed as provided in paragraph (3). If the seal becomes broken or damaged, the certificate holder shall remove the taxicab from service immediately and schedule a new meter inspection by the Enforcement Department.

(c) Location of meter. The meter shall be installed in the center of the driver portion of the taxicab in a position that permits the passenger to view the current fare.

Notation

Cross References

This section cited in 52 Pa. Code § 1017.26 (relating to certificate holder responsible); and 52 Pa. Code § 1021.11 (relating to driver requirements).