Section 1017.12. Required markings and information

(a) In addition to the name, colors and markings required under § 1019.7 (relating to name, colors and markings review), a taxicab must continually display the following markings and information:

(1) The identification number required under § 1017.14 (relating to taxicab numbering) must be posted on the front fenders of the taxicab and on the rear of the taxicab in print at least 3 inches in height and at least 1/2 inch in width.

(2) Beginning January 1, 2012, a vehicle will not be eligible for inspection as provided in § 1017.2 or § 1017.31 (relating to preservice inspection; and biannual inspections by Authority) unless the name of the certificate holder appears on the front fenders of the taxicab in print at least 2 inches in height and at least 1/2 inch in width.

(3) Current inspection stickers required under § 1017.32 (relating to TLD inspection sticker required) must be attached to the lower passenger side windshield.

(4) If the vehicle is a medallion taxicab, the current medallion must be attached to the hood of the vehicle.

(5) A taxicab must be registered with the Department of Transportation and obtain commercial registration plates identifying the vehicle as a taxicab bearing the letters ‘‘TX.’’

(b) The Authority will produce the standardized postings required by this part for taxicabs and may permit certificate holders to produce substantially similar postings. The Authority will specify the location of each posting. A list of the required postings and the locations of the posting will be made available at www.philapark.org/tld.

Notation

Cross References

This section cited in 52 Pa. Code § 1017.77 (relating to public notice).