Section 37.58. Seal

(a) A registrant shall obtain, at the registrant’s own expense, a seal in the design authorized by the Board. The following are Board authorized seals for ‘‘Registered Professional Engineer’’ (Design A), ‘‘Registered Professional Land Surveyor’’ (Design B) and ‘‘Registered Professional Geologist’’ (Design C):

(b) The seal shall contain the legend ‘‘Registered Professional Engineer,’’ ‘‘Registered Professional Land Surveyor’’ or ‘‘Registered Professional Geologist’’ and the registrant’s name and registration number.

(c) The seal shall be 1 3/4 inch in diameter. The diameter of a pocket seal may be reduced to 1 1/2 inch if the design is in the same relative proportions in subsection (a).

(d) A registrant may use a rubber stamp or computer image which is a facsimile of the seal, if the registrant first obtains a seal in accordance with this section.

The provisions of this § 37.58 adopted January 21, 1994, effective January 22, 1994, 24 Pa.B. 518; amended October 25, 1996, effective October 26, 1996, 26 Pa.B. 5106. Immediately preceding text appears at serial pages (206177) to (206178).