Section 266b.31. Waste management for universal waste oil-based finishes

A large quantity handler of universal waste oil-based finishes shall manage oil-based finishes, in their original or otherwise appropriate and labeled packaging, in a way that prevents releases of universal waste or a component of a universal waste to the environment, as follows:

(1) A large quantity handler of universal waste oil-based finishes shall contain oil-based finishes that show evidence of leakage, spillage or damage that could cause leakage under reasonably foreseeable conditions in a container. The container must be closed, structurally sound, compatible with the oil-based finish, and must lack evidence of leakage, spillage or damage that could cause leakage under reasonably foreseeable conditions.

(2) A large quantity handler of universal waste may not process oil-based finishes (for example including, but not limited to, opening, blending, filtering, and the like).

The provisions of this § 266b.31 adopted December 22, 2000, effective December 23, 2000, 30 Pa.B. 6587; amended January 9, 2009, effective January 10, 2009, 39 Pa.B. 201. Immediately preceding text appears at serial pages (272747) to (272748).

Notation

Authority

The provisions of this § 266b.31 amended under sections 105, 402 and 501 of the Solid Waste Management Act (35 P. S. § § 6018.105, 6018.402 and 6018.501); sections 303 and 305(e)(2) of the Hazardous Sites Cleanup Act (35 P. S. § § 6020.303 and 6020.305(e)(2)); section 5, 402 and 501 of The Clean Streams Law (35 P. S. § § 691.5, 691.402 and 691.501); and section 1920-A of The Administrative Code of 1929 (71 P. S. § § 510-20).