Section 266b.3. Definitions

In addition to the definitions incorporated by reference in 40 CFR 273.9 (relating to definitions), the following words and terms, when used in this chapter, have the following meanings, unless the context clearly indicates otherwise:

Oil-based finishes—

(i) Any paint or other finish that may exhibit, or is known to exhibit, a hazardous waste characteristic as specified in 40 CFR Part 261, Subpart C (relating to characteristics of hazardous waste), or which contains a listed hazardous waste as specified in 40 CFR Part 261 Subpart D (relating to lists of hazardous wastes), and is in original packaging, or otherwise appropriately contained and clearly labeled.

(ii) Examples of oil-based finishes include, but are not limited to, oil-based paints, lacquers, stains and aerosol paint cans.

Photographic solutions—Silver-bearing waste streams resulting from photographic processing solutions or rinse water.

The provisions of this § 266b.3 adopted December 22, 2000, effective December 23, 2000, 30 Pa.B. 6587; amended January 9, 2009, effective January 10, 2009, 39 Pa.B. 201. Immediately preceding text appears at serial pages (317330) and (272745).

Notation

Authority

The provisions of this § 266b.3 amended under sections 105, 402 and 501 of the Solid Waste Management Act (35 P. S. § § 6018.105, 6018.402 and 6018.501); sections 303 and 305(e)(2) of the Hazardous Sites Cleanup Act (35 P. S. § § 6020.303 and 6020.305(e)(2)); section 5, 402 and 501 of The Clean Streams Law (35 P. S. § § 691.5, 691.402 and 691.501); and section 1920-A of The Administrative Code of 1929 (71 P. S. § § 510-20).

Cross References

This section cited in 25 Pa. Code § 261a.8 (relating to requirements for universal waste); 25 Pa. Code § 266b.1 (relating to incorporation by reference and scope); and 25 Pa. Code § 266b.2 (relating to applicability—mercury-containing devices).