Section 291.103. Maps and related information

(a) An application shall contain a topographic map on a scale in which 1 inch equals no more than 400 feet, including necessary narrative descriptions, which show the following:

(1) The boundaries and the names of the present owners of record of the land, including easements, rights-of-way and other property interests, for the proposed permit area and adjacent areas; and a description of all title, deed or usage restrictions affecting the proposed permit area.

(2) The boundaries and the names of the present owners for the proposed permit area and adjacent area.

(3) The boundaries of the land where residual waste will be applied over the estimated total life of the proposed operation, including the boundaries of land that will be affected in each sequence of land application activity.

(4) The boundaries of land where residual waste will be stored at various times over the estimated total life of the proposed operation.

(5) The location and name of public and private water sources and wells within the isolation distances in § 291.202 (relating to areas where the land application of residual waste is prohibited).

(6) Municipalities in which the permit area is proposed to be located.

(7) The location and type of existing or proposed erosion control devices.

(8) Surface waters in the proposed permit area and adjacent area, as required by § 291.106 (relating to surface water information).

(b) An application shall contain a United States Department of Agriculture Soil Conservation Service soils map, or aerial photographs if current soils maps are unavailable, which shows the location and types of soils within the proposed permit area and adjacent area.

The provisions of this § 291.103 amended January 12, 2001, effective January 13, 2001, 31 Pa.B. 235. Immediately preceding text appears at serial page (226799).

Notation

Cross References

This section cited in 25 Pa. Code § 291.222 (relating to annual operation report).