Section 145.76. Additional requirements to provide heat input data

The owner or operator of a unit that monitors and reports NO_x mass emissions using a NO_x concentration system and a flow system shall also monitor and report heat input at the unit level using the procedures in 40 CFR Part 75 (relating to continuous emission monitoring).

Notation

Cross References

This section cited in 25 Pa. Code § 145.4 (relating to applicability); 25 Pa. Code § 145.5 (relating to retired unit exemption); 25 Pa. Code § 145.30 (relating to compliance certification report); 25 Pa. Code § 145.42 (relating to NO_x allowance allocations); 25 Pa. Code § 145.54 (relating to compliance); 25 Pa. Code § 145.70 (relating to general monitoring requirements); 25 Pa. Code § 145.71 (relating to initial certification and recertification procedures); 25 Pa. Code § 145.75 (relating to petitions); 25 Pa. Code § 145.81 (relating to opt-in source general provisions); 25 Pa. Code § 145.83 (relating to applying for a NO_x budget opt-in approval); 25 Pa. Code § 145.84 (relating to opt-in process); 25 Pa. Code § 145.87 (relating to opt-in unit change in regulatory status); and 25 Pa. Code § 145.88 (relating to NO_x allowance allocations to opt-in units).