Table VI. VOC Content Limits for Adhesive or Sealant Products Applied to Particular Substrates, As Applied

Adhesive or Sealant Products Applied to the Listed Substrate	VOC content limit (pounds VOC per gallon, less water and exempt compounds)*	VOC content limit (grams VOC per liter, less water and exempt compounds)*
Fiberglass	1.7	200
Flexible vinyl	2.1	250
Metal	0.3	30
Porous material	1.0	120
Rubber	2.1	250
Other substrates	2.1	250

*The VOC content is determined as the weight of VOC per volume of product, less water and exempt compounds, as specified in subsections (bb) and (cc) or as the weight of VOC per volume of product, as specified in subsection (dd).

Authority

The provisions of this § 129.77 amended under section 5(a)(1) and (8) of the Air Pollution Control Act (35 P. S. § 4005(a)(1) and (8)).

Source

The provisions of this § 129.77 adopted December 24, 2010, effective December 25, 2010, 40 Pa.B. 7340; amended June 27, 2014, effective June 28, 2014, 44 Pa.B. 3929. Immediately preceding text appears at serial pages (355201) to (355212).

Cross References

This section cited in 25 Pa. Code § 121.1 (relating to definitions); 25 Pa. Code § 129.51 (relating to general); 25 Pa. Code § 129.67a (relating to control of VOC emissions from flexible packaging printing presses); 25 Pa. Code § 129.67b (relating to control of VOC emissions from offset lithographic printing presses and letterpress printing presses); 25 Pa. Code § 129.74 (relating to control of VOC emissions from fiberglass boat manufacturing materials); and 25 Pa. Code § 130.703 (relating to exemptions and exceptions).