Section 1017.71. Taxicab safety cameras

(a) Generally. Beginning on February 23, 2015, a taxicab must be equipped with one safety camera system that satisfies the requirements in this subchapter.

(b) Inspection and approval.

(1) A taxicab safety camera system must be inspected by the Authority prior to use.

(2) The Authority will conduct safety camera system testing to ensure the system meets the requirements of this subchapter.

(3) Upon determining that a safety camera system functions properly, the Enforcement Department will:

(i) Download and retain a view captured by each camera lens.

(ii) Seal the data extraction port.

(iii) Post notice of the safety camera system on the taxicab as provided in § 1017.77(b) (relating to public notice).

(4) A safety camera system may not be used in a taxicab unless it is sealed as provided in paragraph (3). When the seal is broken or damaged, the certificate holder shall remove the taxicab from service immediately and schedule a new safety camera system inspection by the Enforcement Department.

(5) In the event that a safety camera system is not fully operational, the taxicab shall be taken out of service and the Enforcement Department shall be notified immediately.

Notation

Cross References

This section cited in 52 Pa. Code § 1017.5 (relating to basic vehicle standards); and 52 Pa. Code § 1017.78 (relating to use of captured images).