Title 25--ENVIRONMENTAL PROTECTION ENVIRONMENTAL QUALITY BOARD [25 PA. CODE CHS. 121, 129 AND 139] [30 Pa.B. 3779] [Correction]
Surface Coating Processes (RBI # 4) An error occurred in the preamble to this document which appeared at 30 Pa.B. 2995, 2997 (June 10, 2000). A compliance date in § 129.101 (relating to general provisions and applicability), was printed incorrectly. The correct date for compliance is June 11, 2001. The correct version of the paragraph in question is as follows:
Subsection (b) requires the owners or operators of wood furniture manufacturing operations to comply with the requirements of §§ 129.101--129.107 by June 11, 2001, if the actual emissions or potential to emit (PTE) for VOCs are 25 tons per year or greater. The compliance deadline for the presumptive RACT requirements does not apply to wood furniture manufacturing operations that have obtained EPA-approved SIP revisions for case-by-case RACT prior to June 10, 2000. Major VOC-emitting wood furniture manufacturing operations will no longer be subject to the RACT requirements in §§ 129.91--129.95 (relating to stationary sources of NOx and VOCs) because the EPA has now issued a CTG for the control of VOC emissions from wood furniture manufacturing operations (61 FR 25223 (May 20, 1996)). Therefore, the Department will withdraw any case-by-case RACT determination that has not been EPA-approved as a SIP revision by June 10, 2000.
[Pa.B. Doc. No. 00-00-1027. Filed for public inspection June 9, 2000, 9:00 a.m.]
